Cell Pack Solutions Ltd
Custom Made Cell Packs & Industrial Batteries
home about contact customer service batterytastic.co.uk

Ansmann - Desktop-PS-50W <BACK
Click here to print this page print Data sheet Download Data sheet

Ansmann Product Code: 8294069

 


Type: Switch-mode Adjustable
Desktop power supply
Input voltage: 100-240V ~ 50-60Hz ±
10%
Input current: 1.2A

Output Voltage (VDC ±10%)
Output current (at 100-240V)
5
5
6
4.5
7
4.3
8
4.2
9
4
10
3.8
11
3.8
12
3.8
13
3.5
14
3.3
15
3.1
16
2.8
17
2.7
18
2.6
19
2.4
20
2.3
21
2.2
22
2.1
23
2
24
1.0

Inrush current: limited to 20A for a cold start
Rated power: max. 50W continuous
max. 70W peak
Protection: IP 40
Insulation: 3.75KV(2s)
Insulation Class: II
Operating humidity: 30%...95%
Ripple noise: <100mV
Over-heat protection: Yes
Over-Load protection: No
Operating Temperature: 0ºC…+40ºC
Short-circuit protection: No
Storage temperature: -25ºC…+85ºC
Dimensions: 108 mm x 58 mm x 37 mm (L x W x H)
Weight including packaging: 478g
Accessories: 20 pcs. Mini-Plug Jumpers 5 - 24V in 1V increments
8 pcs. Output connectors
Approx 2 metres output lead with polarity inverter
Standard IEC mains input socket
Approvals: CE, CB, GS, cETLus
Tested according to: EN 60950: 1992+A1+A2+A3+A4+A11
UL 1950: 1995 R6.98
CAN/CSA-C22.2 No. 950-95
EN 610000-3-3
EN55022 : EN55024
EN 610000-3-2
Description:

This is one of the two higher power desktop power supplies from Ansmann with a rated power of 50W (70W peak). It is a switch mode regulated power supply which means that the oputput voltage is regulated by the supply itself which means you can be assured the output voltage is at the level selected. It aso means that it can be used worldwide.

Unlike other universal power supplies which have a voltage selector switch, this power supply comes with a range of mini plugs (jumpers) rated to the various voltages which is inserted into the power supply to select the required output voltage.

This power supply is suitable for sensitive applications but care needs to be taken if EMF radiation levels are important. This power supply is also much lighter than a linear power supply.

The housing is rated at IP40, is insulated to 3.75kV primary and secondary, insulation class II, and has built in, over heat protection,. Ripple noise from this power supply is <100mV and the inrush current is limited to 20A for a cold start. It will also operate in a humidity range of 30% ...95%.

Applications: digital cameras, camcorders, pocket computers, MP3 players, laptops, cordless phone cradels and other non-mobile applications.


Cell Pack Solutions Ltd - Unit 218 Tedco Business Works, South Shields, Tyne and Wear, NE33 1RF. UK.
Tel: +44 (0)191 4274577 - Fax: +44 (0)191 4274606 - E-mail:

VAT No: 708 9179 02 - Company No: 4177772

www.cellpacksolutions.co.uk